High precision under adverse weather conditions

During a mid-March snowstorm, researchers from MIT Lincoln Laboratory achieved real-time, nighttime, centimeter-level vehicle localization while driving a test vehicle at highway speeds over roads whose lane markings were hidden by the snow. The sport utility vehicle used in the demonstration was equipped with a system that employs a novel ground-penetrating radar technique to localize the vehicle to within centimeters of the boundaries of its lane. The technique could solve one of the problems limiting the development and adoption of self-driving vehicles: How can a vehicle navigate to stay within its lane when bad weather obscures road markings?

“Most self-localizing vehicles use optical systems to determine their position,” explains Byron Stanley, the lead researcher on Lincoln Laboratory’s localizing ground-penetrating radar (LGPR) program. “They rely on optics to ‘see’ lane markings, road surface maps, and surrounding infrastructure to orient themselves. Optical systems work well in fair weather conditions, but it is challenging, even impossible, for them to work when snow covers the markings and surfaces or precipitation obscures points of reference.”

The laboratory has developed a sensor that uses very high frequency (VHF) radar reflections of underground features to generate a baseline map of a road’s subsurface. This map is generated during an LGPR-equipped vehicle’s drive along a roadway and becomes the reference for future travels over that stretch of road. On a revisit, the LGPR mounted beneath the vehicle measures the current reflections of the road’s subsurface features, and its algorithm estimates the vehicle’s location by comparing those current GPR readings to the baseline map stored in the system’s memory. An article titled “Localizing Ground Penetrating RADAR: A Step Toward Robust Autonomous Ground Vehicle Localization” in a recent issue of the Journal of Field Robotics describes Lincoln Laboratory’s demonstration of the use of LGPR to achieve 4-cm (1.6-inch) in-lane localization accuracy at speeds up to 60 miles per hour.

“The LGPR uses relatively deep subsurface features as points of reference because these features are inherently stable and less susceptible to the dynamics of the world above,” Stanley says. Surface characteristics, such as lane striping, signs, trees, or the landscape, are dynamic; they are changed or change over time. The natural inhomogeneity in the highly static subterranean geology — for example, differences in soil layers or rock beds — dominates the GPR reflection profiles. The GPR-produced map of the subsurface environment is a fairly complete picture, capturing every distinct object and soil feature that is not significantly smaller than a quarter of a wavelength.

The LGPR’s main component is a waterproof, closely spaced 12-element antenna array that uses a very high frequency, stepped-frequency continuous wave to penetrate deeper beneath the ground than can typical GPR systems. This deeper look allows the LGPR to map the most stable, thus reliable, subsurface characteristics. “The GPR array is designed so that measurements from each element look similar and thus can be compared with others on subsequent passes,” Stanley says. A single-board computer is used to correlate the GPR data into a three-dimensional GPS-tagged GPR map and extract a corrected GPS position estimate.

The researchers who conducted the March test runs — Stanley, Jeffrey Koechling, and Henry Wegiel — alternated driving over a route in the Boston area during a snowstorm from midnight to 9 a.m. Correlation and overlap estimates demonstrated that the LGPR technique could accurately, and repeatedly, determine the vehicle’s position as it traveled. Post-processing methods on a sensor suite were then used to provide estimates of the accuracy of the system. “We thought the radar would see through snow, but it was wonderful to finally get the data proving it,” Koechling says.